Automatic detection from name
"If you check the ""Automatically detect material and number of pieces"" box during upload, the system will try to read this information directly from the names of the uploaded files."
File name format
The correct format is: name_material-code_quantityx.dxf
Examples:
- Materiál: Ocel 2mm, Počet: 50 ks
- Materiál: Hliník 3mm, Počet: 2 ks
- Materiál: Nerez 1.5mm, Počet: 10 ks
Available material codes
Use the code (slug) listed in the table below:
| Material name | Code for file name | Thickness |
|---|---|---|
| Hliník 1 mm | hlinik-1mm |
1.0 mm |
| Nerez 1 mm | nerez-1mm |
1.0 mm |
| Ocel 1 mm | ocel-1mm |
1.0 mm |
| Ocel 2 mm | ocel-2mm |
2.0 mm |
| Hliník 5 mm | hlinik-5mm |
5.0 mm |
| Nerez 5 mm | nerez-5mm |
5.0 mm |
| Ocel 5 mm | ocel-5mm |
5.0 mm |
| Nerez 10 mm | nerez-10mm |
10.0 mm |
| Ocel 10 mm | ocel-10mm |
10.0 mm |